ModMon Crack Keygen Full Version For Windows

The name ModMon stands for Modem Monitor. ModMon will show you a realtime display of your computer’s modem status register for a given COM port. This means that as your modem’s status changes, ModMon will reflect these changes in its table.
For each of the indicators in the display, ModMon will display a “ú” (light bullet) to signify “off” or “low”, and a “Û” to signify “on” or “high”. To make ModMon display your modem’s status register on a specific COM port, type ModMon #, where # is the COM port number. If you add the /b switch, ModMon will beep as your phone line rings. If a COM port you specify is not installed, you will not see a ú or a Û in the table. For example, if you type MODMON 3, and you don’t have a device on COM 3, the table will remain blank.
Example: If you have a modem on COM 2, and would like to monitor its activity
and hear the telephone ring through your PC speaker you would type: ModMon 2 /B
Here is a list of the indicator names and their descriptions:
CCT: Change in “clear to send”
CDS: Change in “data set ready”
CRI: Change in “ring indicator”
CDC: Change in “data carrier detect”
CTS: “Clear to send” set high
DSR: “Data set ready” set high
RNG: “Ring indicator” set high
DCD: “Data carrier detect” set high
Here is a further explanation of the quoted terms above.
Clear to send: The modem is ready to receive characters from the PC.
Data set ready: The modem is powered on and ready to operate.
Ring indicator: The phone line is ringing. As the line rings, RI is held
high (on) so that your PC can detect the rings.
Data carrier detect: The modem is connected to another modem.

===========================================================================
Index Indicator Value Description
===========================================================================
Indicator Index Description
CCT Off false
CDS Off false
CRI On false
CDC Off false
CTS Off false
DSR Off false
DCD On false
RNG On false
Notes
Modem Power
===========================================================================
The following steps are the standard steps for powering on the
modem using the supplied power adapter.
1. Turn the power switch on the modem to the on position.
2. Open the back panel cover, locate the power switch, and turn
it to the on position.
3. Press the power switch off to turn off the modem.
4. Unplug the power adapter.
5. Reset the modem using the following steps
6. Turn the power switch on the modem to the on position.
7. Unplug the modem’s power cord from the power adapter.
8. Open the back panel cover, locate the reset button, and
press it.
9. While holding down the reset button, press the power switch
off to turn off the modem.
Note: Modem will only respond to COM or POTS dials after power
up.
Modem Reset
===========================================================================
The following steps are the standard steps for resetting the
modem.
1. Turn the power switch on the modem to the on position.
2. Press the reset button on the modem.
3. Wait until you hear the modem beep.
4. Press the power switch off to turn off the modem.
5. Unplug the modem’s power cord from the power adapter.
6. Open the back panel cover, locate the power switch, and
turn it to the off position.
Modem Flush
===========================================================================
The modem will automatically flush any internal buffers that
have become empty.
1. Turn the power switch on the modem to the on position.
2. While holding down the flush button on the modem, press the
power switch off to turn off the modem.
===========================================================================
Modem Status
===========================================================================
This table is where ModMon Cracked Accounts stores all modem status.
Indicator Code Value Description
===========================================================================
Index Indicator Description
Index Description
0n Off false
0q Off false
1n Off false
1q Off false
2n Off false
2q Off false
3n Off false
3q Off false
4

Description of what this switch does.
SW: Softswitched (used in conjunction with a phone line)
SC: Switch Control (used with SCI indicator)
SBI: Signal Backed Indicator (used with SBI indicator)
SECN: Set Channel Number (used with SECN indicator)
Selected PCN: Selected PCN (used with SECN indicator)
SCR: Set Channel Response (used with SECN indicator)
SCI: Signal Channel Indicator (used with SBI indicator)
SBI: Signal Backed Indicator (used with SBI indicator)
SBL: Silence Backed Low (used with SCI indicator)
SBH: Silence Backed High (used with SCI indicator)
SBN: Silence Backed Normal (used with SCI indicator)
SBH: Silence Backed High (used with SBL indicator)
SBN: Silence Backed Normal (used with SBH indicator)
SBL: Silence Backed Low (used with SBH indicator)
SCR: Set Channel Response (used with SECN indicator)
SCI: Signal Channel Indicator (used with SBI indicator)
SBL: Silence Backed Low (used with SCI indicator)
SBH: Silence Backed High (used with SCI indicator)
SBN: Silence Backed Normal (used with SCI indicator)
SBH: Silence Backed High (used with SBL indicator)
SBN: Silence Backed Normal (used with SBH indicator)
SBL: Silence Backed Low (used with SBH indicator)
COM Port Number: The number of the COM port to which you are connected
CON: Configuration Control (used with CMI indicator)
CMI: Change in Modem Interrupt Mode
CDC: Change in Data Carrier Detect
CMD: Change in Modem Ring Indicator
CCR: Change in COM Call Request
CM: Change in Modem Ready
CMT: Change in Modem Timing
CRI: Change in Ring Indicator
COM Port Number: The number of the COM port to which you are connected
CMI: Change in Modem Interrupt Mode
CDC: Change in Data Carrier Detect
CMD: Change in Modem Ring Indicator
CCR: Change in COM Call Request
CM: Change in Modem Ready
CMT: Change in Modem Timing
CRI: Change in Ring Indicator
C
a86638bb04

This program monitors your modem’s status register on the specified COM port
and displays the results in a table. Changes in modem status are reflected in
the table as the modem’s register’s LED’s light and the modem beeps. To view
your modem’s registers, simply enter the COM port number. By default, the COM
port number is 3. If the port is not in use by a modem, you will not see a
register on the table. If you want to monitor the other ports, simply add
the # to the COM port number. For example, if you want to monitor COM 3, type:
ModMon 3#. You can add the /b switch, which will make ModMon beep as your
line is ringing. A ModMon display should appear as follows. If the indicator
you are interested in is not present, you will not see a Ú or a Û.
Modem
status
Register
name
Ú/Û Indicator
at
test
port
COM3 3 On (high)
Notes
(1) If the indicator light does not change, it may be because the modem is
not plugged into the port, or your computer is not set up to receive data from
the modem. In this case, it will not change.
(2) ModMon beeps as the line rings. If you have a modem that beeps as the
phone line rings, your PC speaker will interpret the modem beep as the ring
indicator light rising.
(3) If you plug in a modem that beeps as the phone line rings, your computer
will interpret this beep as an indication that the line is ringing.
(4) If you need ModMon to show changes in your modem’s register even if you
are not connected to a modem, unplug the modem and ModMon will still work.
(5) ModMon will only display one set of registers at a time, unless you add
the /b switch. The reason for this is that if you are monitoring a modem on
the same COM port as another modem, the other modem’s registers will be
overwritten.
(6) If you want ModMon to beep at test and set level changes, change the
default level in the ModMon configuration file, and enter /b. To beep as the
line rings, you will need to enter /b in ModMon configuration file and enter
the

Set on: Data ready
Set off: Data not ready
RT: Ready to transmit
TR: Transmit request
LS: Line status changed
RT: Received transmitted information

CCT is the Output Character Transmission Register. When the line is ready, CCT is set off and remains off as long as the line is ready. The line is ready to transmit when the modem is set to the state of “Set on”.

CDS is the Output Data Set Register. When the modem is set to the state of “Set on”, the modem is ready to transmit data. When CDS is set on and the modem is in the state of “Set off”, it is ready to receive data.

CRI is the Ring Indicator. When the modem is set to the state of “Set on” and the line is ringing, RI is set on and remains high as long as the modem is set to the state of “Set on”. When the modem is in the state of “Set off”, it is set off and remains off as long as it is set to the state of “Set on”.

CDC is the Data Carrier Detect. When the modem is set to the state of “Set on” and the line is ready to transmit data, CDC is set on and remains high as long as the modem is set to the state of “Set on”. When the modem is in the state of “Set off”, it is set off and remains off as long as it is set to the state of “Set on”.

CTS is the Set Terminal Status. When the modem is set to the state of “Set on” and the line is ready to transmit data, CTS is set on and remains high as long as the modem is set to the state of “Set on”. When the modem is in the state of “Set off”, it is set off and remains off as long as it is set to the state of “Set on”.

DSR is the Data Set Ready. When the modem is set to the state of “Set on”, the modem is ready to transmit data. When DSR is set on and the modem is in the state of “Set off”, it is ready to receive data.

DCD is the Data Carrier Detect. When the modem is set to the state of “Set on” and the line is ready to transmit data, DCD is set on and remains high as long as the modem is set to the state of “Set on”. When the modem is in the state of “Set off”, it is set off and remains off as long as it is set to the state of �

https://techplanet.today/post/download-autocad-2015-portable-64-bit-full
https://techplanet.today/post/vector-nti-1152-exclusive-crack
https://techplanet.today/post/un-verdadero-despertar-joe-vitale-pdf-pdf
https://techplanet.today/post/tum-mile-dual-audio-in-hindi-720p-movie
https://techplanet.today/post/emailhackerv346activationcod-best
https://techplanet.today/post/particle-illusion-32-full-crack-updated
https://techplanet.today/post/w-batterymdl-2021-download-cs-16
https://techplanet.today/post/weapons-of-peace-raj-chengappa-pdf-84
https://techplanet.today/post/startisback-212-preactivated-link-crack
https://techplanet.today/post/cricco-di-teodoro-versione-gialla-volume-4-pdf-86-hot
https://techplanet.today/post/cna-windows-k9-installer-5-6-3-enexe-1
https://techplanet.today/post/test-tone-generator-44-crack-serial-keygen-56-exclusive
https://jemi.so/izotope-phatmatik-pro-vsti-v152-incl-keygenbeat-top

Supported systems: Windows 10, Windows 8/8.1, Windows 7/Vista
Operating System: Windows 10, Windows 8/8.1, Windows 7/Vista
CPU: Core i3/Core i5/Core i7
Memory: 2 GB RAM
Graphics: DirectX 10-compatible graphics card with a 64-bit driver and supported OpenGL version
DirectX: Version 10.0
Hard disk space: 200 MB available space for the installation file, 400 MB for the user manual and other files
Free

https://womss.com/bitnami-jrubystack-1-6-6-crack-with-product-key-free/
http://berlin-property-partner.com/?p=70126
http://mrproject.com.pl/advert/microsoft-phone-data-manager-crack-with-full-keygen-free-download-for-windows/
https://www.siriusarchitects.com/advert/remove-logo-now-crack-with-license-key-download/
https://blu-realestate.com/?p=195457
https://classifieds.cornerecho.com/advert/staffcop-home-edition-crack-with-keygen/
http://eyescreamofficial.com/edwinxp-license-key-full-download-latest-2022/
https://www.theconstitutionalcitizen.com/buildings-icons-crack/
http://www.giffa.ru/who/pc-registry-cleaner-crack-free-download-pc-windows/
http://www.rathisteelindustries.com/smooth-clock-crack-free/